DIY No-Sew Curtain Panels

 

 

 

Supplies:

• fabric
• no-sew iron on adhesive tape (heat n’ bond)
• measuring tape
• fabric scissors
• clothes iron
• old towel
• curtain rings and clips

Instructions:

• cut fabric to desired length (65in, 86in, 95in, 102in or 108in)
  • **TIP: I always hang my curtains from ceiling to floor, rather than top of the window frame to floor, to create the illusion of a taller ceiling.
  • 8ft ceiling = 96 inches = 2.67 yards of fabric
  • 9ft ceilings= 108 inches= 3 yards of fabric
• iron ALL of the fabric to remove wrinkles
• place an old towel under the edges of fabric so you don’t damage the carpet
• place adhesive tape around the perimeter of the fabric about 1/2 in from the edges (leave room to fold over)
• fold the fabric over the adhesive tape and place hot iron on top for 5-6 seconds and slowly work your way around the fabric until all sides are “hemmed”
• clip the curtains to the rings
• hang the curtains
• DONE!! Easy Peasy

Also see how to make your very own DIY Curtain Rod out of PVC pipe, coat hooks, and cabinet knobs